Assigning a static or dynamic (DHCP) IP address to AddressRight printers
Learn how to assign a static or dynamic (DHCP) IP address to AddressRight printers.
Products affected:
DA30s AddressRight® Addressing System
DA50s AddressRight® Addressing System
DA55s AddressRight® Addressing System
DA70s AddressRight® Addressing System
DA75s AddressRight® Addressing System
DA80s AddressRight® Addressing System
DA95f AddressRight® Addressing System
DA30s AddressRight® Addressing System
DA50s AddressRight® Addressing System
DA55s AddressRight® Addressing System
DA70s AddressRight® Addressing System
DA75s AddressRight® Addressing System
DA80s AddressRight® Addressing System
DA95f AddressRight® Addressing System
To assign an IP address dynamically via DHCP
- Press the ON LINE button until the screen displays OFF LINE.
- Press and hold the Menu key for about 2-4 seconds to enter the Setup Menu.
- Using the + or - keys to scroll, go to Communication > TCP/IP > DHCP, pressing the Enter key to select each.
- Change Disable to Enable and press Enter > Menu.
- Press Menu until you are back at the Ready screen.
- Contact your IT department to obtain an IP address for the AddressRight Printer, as well as the required Subnet Mask and Gateway for your network.
- Press the ON LINE button until the screen displays OFF LINE.
- Press and hold the Menu key for about 2-4 seconds to enter the Setup Menu.
- Using the + or - keys to scroll, go to Communication > TCP/IP > DHCP, pressing the Enter key to select each.
- Change Enable to Disable and press Enter > Menu.
- Scroll down and select IP Address.
- Use the + or - key to set each IP Address section, pressing Enter to confirm each setting.
- Once the IP Address is set, press Enter > Menu.
- Scroll down and select Subnet Mask.
- Use the + or - key to set each Subnet Mask section, pressing Enter to confirm each setting.
- Once the Subnet Mask is set, press Enter > Menu.
- Scroll down and select Gateway Address.
- Use the + or - key to set each Gateway Address section, pressing Enter to confirm each setting.
- Once the Gateway Address is set, press Menu until you are back at the Ready screen.
UPDATED: August 14, 2021