W1110 (1E40, 1E35, 1E41, or 1E45) label printer feeds incorrect label size when printing a label in ShipAccel

When printing a shipping label, a W1110 printer feeds more than one label's worth of paper.

The printer may need to be recalibrated.

• Solution 1: Restart the printer
• Solution 2: Calibrate the printer

Solution 1: Restart the printer

1. Turn the printer off.
2. Wait 1 minute.
3. Turn the printer back on.

If the issue is not resolved, try solution 2.

Solution 2: Calibrate the printer

1. Open the printer’s top cover and feed the label so that it is ¼ inch out of the printer.
2. Press and hold the Stop/Resume and the Feed/Cancel buttons simultaneously just until the rollers begin to move the labels. Immediately release both buttons when the label roll begins to move. The roll should advance one label and the left LED should be solid green.