Setting up the ID card delivery settings in PitneyTrack Inbound and PitneyTrack Enterprise

If you use employee or student ID cards and have the personnel ID completed in the Address Book you can deliver packages by scanning ID cards.

1. Select Settings > Delivery.
2. Turn the Find Packages by Card ID slider on.
3. Under Match personnel id in address book using, select either:
   • Full card ID number: If the ID number on the card matches exactly the personnel ID in the Address Book.
   • Part of card ID number: If the personnel ID contains additional characters that are not present on the ID card. For example, if there are leading zeroes in the personnel ID.
     • Recipient ID Starting Position: The position in the ID string where the system will start reading the numbers. For example, if the ID number is 00012345678000, and you want it to ignore the 3 leading zeroes, then you would set this to 4.
     • Recipient ID String Length: The length of the ID string that you want the system to read, starting from the starting position indicated above. For example, if the ID number is 00012345678000, and you want it to stop reading after the 8 (only reading the non-zero digits), then you would set this to 8.
4. (Optional) Under Scan packages for delivery, select Require to scan all packages when delivering if you need to scan all the packages for a specific recipient. You may need to scroll back up to see this setting.
5. Save your changes:
   • If you are using PitneyTrack Inbound or PitneyTrack Asset, select the Update Settings button at the top to save your changes.
   • If you are using PitneyTrack Enterprise, select Save Settings, select the sites where you want to apply your changes to and select Update # Site(s) or Update All Sites.

The features and options you see may vary depending upon your role and subscription. If you have any questions regarding your permissions, please contact your administrator.