Skip to main content
Related Search Topics: Errors & Troubleshooting
Print this support article

Resolve error 51 "Remove material from: Folder Area" and folder jams on the DI950, Relay 8000 and more

Learn how to resolve error 51 "Remove material from: Folder Area" and folder jams DI900, DI950, Relay 5000, Relay 6000, Relay 7000 and Relay 8000.
Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000

Issue

The inserter is displaying error 51 Remove material from: Folder Area when material enters the folder and will not run.

Cause

Material is jammed in the folder.

Resolution

To resolve this issue: 
  1. Remove any partially fed material from the feed trays.
  2. Open the front cover.
  3. Check for jams in the folder (area above knob 3).
  4. Closed all jam release knobs and covers.
  5. Press Cancel to clear the error. 
  6. Press Clear Deck to remove any material that is still in the system. 
  7. Verify that the correct material is loaded for this job.
Note: To check the loading directions, select Loading Directions and Pre-Run Adjustments on the job screen.

If the issue is not resolved or if the issue returns, contact customer support from 8 am to 8 pm Eastern Time. Please have your model number ready.

UPDATED: August 14, 2021