Printing and Reprinting Stamp Sheets in SendPro Enterprise

Printing Stamps

1. Open the Stamps app. If using the Desktop App, click Print Stamps from the landing page.
2. Enter the stamp sheet page serial number into the Serial Number field.
3. (Optional) Click Test Print to print test stamps for proper alignment. A test print should be performed whenever a new printer is used for the first time.
4. (Optional) Complete the chargeback and reference fields in the Accounting and References section.
5. Click RATE.
6. Click PRINT STAMPS.

Reprinting Stamp Sheets

1. Open the Stamps app. If using the Desktop App, click Print Stamps from the landing page.
2. Enter the stamp sheet page serial number into the Serial Number field. If the serial number is correct, the stamp sheet image will display the used stamps with a USED watermark.
3. Click the ellipsis (…) next to the TEST PRINT button, then click REPRINT SHEET. Only one reprint of a stamp sheet is permitted by USPS regulations, and must be done within 24 hours of the original print. The original sheet must be destroyed.
4. Read and acknowledge the reprint disclaimer by clicking Confirm.