Skip to main content
Related Search Topics: Errors & Troubleshooting
Print this support article

Error code 0802 on the SendPro C Lite, SendPro C, SendPro+, SendPro C Auto

Installing the printhead incorrectly often causes error code 0802.
Products affected: SendPro® C Lite, SendPro® C, SendPro®+, SendPro® C Auto  (8H00, 9H00)

Issue

Error 0802 appears.

Cause

Make sure you install the printhead correctly.

Resolution

Remove the printhead and re-seat it correctly.

  1. Tap Settings.
    settings-icon
  2. Scroll down to the Envelope Printer Settings section.
  3. Tap Mail Printer Maintenance.
  4. Tap Install Printhead.
  5. Lift the cover. The ink cartridge moves to the front position.
  6. Flip the ink cartridge cover open.
    Push green lever openInk cartridge cover open
  7. Remove the ink cartridge.
    Ink cartridge being removed
  8. Squeeze the two gray tabs on either side of the printhead.
    Printhead removal
  9. While squeezing, lift and tilt the printhead to the right. The printhead should come up out of the device.
    Printhead withdrawal
  10. Squeeze the tabs and slide the printhead pegs into the lower set of grooves.
    Insert printhead
    Warning: This step is critical to prevent system damage.
  11. Keep squeezing the tabs and push the printhead flush against the wall. Tabs will snap outward when placed correctly.
    correctly-seat-print-head_303x303
  12. Install the ink cartridge and close the guard.
    Installing ink cartridge
  13. Close the cover. The ink cartridge moves back to the original position.
    Close top cover
  14. Tap Done.

UPDATED: July 04, 2024