Setting the lock code on the mailstation series

Use the lock code to prevent unauthorized access to your system after your machine powers up and/or enters sleep mode.

1. Press Menu.
2. Press Review (down) to scroll to Change Setup?
3. Press Enter/Yes.
4. Press Review (down) to scroll to Use Lock Code Setup?
5. Press Enter/Yes.
6. If a lock code has been established, the meter prompts you to enter the lock code at this point. Enter the four-digit code.
7. Press Enter/Yes.
8. Press Review (down) to scroll to Turn On Lock Code.
9. Press Enter/Yes at the Set A Lock Code? prompt.
10. Enter a four-digit code.
11. Press Enter/Yes.
12. Enter the same code again to confirm. A message confirms your choice.
13. Press No when asked to Stay in Setup? to return to the Home screen.

Once a lock code is set, press the Lock button to lock the screen.