Skip to main content
Related Search Topics: Errors & Troubleshooting
Print this support article

Resolve Error 50 "Remove material from: Folder Area and Pre-Fold Area" and folder jams on the DI900, Relay 5000 and more

Resolve Error Code 50 "Remove material from: Folder Area and Pre-Fold Area" and folder jams on the DI900, DI950, Relay 5000, Relay 6000, Relay 7000, and Relay 8000.
Products affected: DI900™, DI950™, Relay™ 5000, Relay™ 6000, Relay™ 7000, Relay™ 8000

Issue

The inserter is displaying error code 50 "Remove material from: Folder Area and Pre-Fold Area" and will not run.

Cause

Material is jammed in the folder.

Resolution 

To resolve this issue: 
  1. Remove any partially fed material from the feed trays.
  2. Open the front cover.
  3. Check for jams in the folder (above knob 3).
  4. Close all jam release knobs and covers.
  5. Press Cancel to clear the error. 
  6. Press Clear Deck to remove any material still in the system. 
  7. Verify that the correct material is loaded for this job.
Note: To check the loading directions, select Loading Directions and Pre-Run Adjustments on the job screen.
 If you need further assistance, please chat with us.

UPDATED: 20 July 2023