Moving the DM60

If you need to move your DM60 franking machine, whether its across the room or to a new facility, a few precautions need to be taken. Follow these steps to move it safely.

1. Remove the ink cartridge:
   1. Press Menu / Options.
   2. Press Review (down) until Use ink functions? appears.
   3. Press Enter/yes.
   4. Press Review (down) until Replace ink cartridge? appears.
   5. Press Enter/yes.
   6. Open the top cover.
      
   7. Press the top of the ink cartridge latch located on the green unlock icon.
   8. Remove the ink cartridge and place it in a zip-top bag, as it may leak in transport.
      
2. Unplug the power lead and close the cover.
3. Unplug the scale from the rear of the franking machine and remove it from the top of the franking machine.
4. When you move the franking machine, ensure that it stays level or ink may leak and damage the franking machine.
5. Reinstall the ink cartridge.
6. Replace and reconnect the scale.
7. Plug the power cord into the franking machine and power outlet.