Assembling the AddressRight 100 printer

Tools required

• Standard #2 Phillips head screwdriver

Installing the Side Guides

1. Remove the two screws from the side guide blocks.
2. Position the side guide screw holes so that they align with the holes in the side guide blocks.
3. Insert the screws removed in step 1. Tighten the screws so that the guides are firmly attached to the side guide blocks [A].
   

Installing the Rear Media Support

1. Install the rear media support onto the rear center plate using the three screws [A] (included).
   

Installing the Rear Media Guide

1. Insert adjusting knob [A] through the rear media guide and rear media support and screw it into the rectangular washer [B].