Output from Options

ValidateAddress returns additional data depending on the options you select. For information on the output generated by each option, see the options listed in the following sections:

Enhanced Line of Travel Output

Enhanced Line of Travel processing produces the following output.

Response Element

Description

USLOTCode

Line of Travel sequence code and an indicator denoting USPS® LOT sequence. This field is in the format nnnnY where:

nnnn
The four-digit LOT code.
Y
One of the following:
  • A—Ascending LOT sequence
  • D—Descending LOT sequence

USLOTHex

A hexadecimal value that allows you to sort your file in ascending order only. The hexadecimal values range from 0 to FF ascending, then FF through 0 descending.

USLOTSequence

A two-byte value used for final sortation in place of the DPC add-on. It consists of an uppercase letter followed by a digit 0 through 9. Values range from A0 (99 descending) through J9 (00 descending), and K0 (00 ascending) through T9 (99 ascending).

LACSLink Output

Response Element

Description

USLACS

Indicates whether or not the address is a candidate for LACSLink conversion (U.S. addresses only). One of the following:

Y
Yes, the address is a candidate for LACSLink processing. If LACSLink is enabled, ValidateAddress will attempt to convert the address using the LACSLink database. If the conversion attempt is successful, the output address is the new address obtained from the LACSLink database. If the attempt is not successful, the address will not be converted.
N
No, the address is not a candidate for LACSLink processing. LACSLink processing may still be attempted if LACSLink processing is requested, the LACSLink database is installed, and one of the following is true:
  • The address matches to a Rural Route address and the RecordType.Default field returns a Y.
  • The input address could not be matched to any address in the U.S. Postal Database (Failures due to multiple matches are not LACSLink candidates.)

USLACS.ReturnCode

Indicates the success or failure of LACSLink processing. (U.S. addresses only.)

A
LACSLink processing successful. Record matched through LACSLink processing.
00
LACSLink processing failed. No matching record found during LACSLink processing.
09
LACSLink processing matched the input address to an older highrise default address. The address has been converted. Rather than provide an imprecise address, LACSLink processing does not provide a new address.
14
LACSLink processing failed. Match found during LACSLink processing but conversion did not occur due to other USPS® regulations.
92
LACSLink processing successful. Record matched through LACSLink processing. Unit number dropped on input.
null
LACSLink did not process the record, or LACSLink processing was not attempted.

RDI Output

Response Element

Description

RDI

Return values indicating address type.

B
The address is a business address.
R
The address is a residential address.
M
The address is both a residential and a business address.
null
Not checked because the address did not code at a ZIP + 4® level, or RDI™ was not performed.

DPV and CMRA Output

Response Element

Description

DPV

Indicates the results of Delivery Point Validation (DPV) processing.

Y
DPV confirmed. Mail can be delivered to the address.
N
Mail cannot be delivered to the address.
S
The building number was validated but the unit number could not be confirmed. A building number is the primary address number for a building. A unit number is a number of a distinct mailing address within a building such as an apartment, suite, floor, and so on. For example, in this address 424 is the building number and 12 is the unit number:

424 Washington Blvd. Apt. 12
Oak Park IL 60302
USA

D
The building number was validated but the unit number was missing from input. A building number is the primary address number for a building. A unit number is a number of a distinct mailing address within a building such as an apartment, suite, floor, and so on. For example, in this address 424 is the building number and 12 is the unit number:

424 Washington Blvd. Apt. 12
Oak Park IL 60302
USA

M
The address matches multiple valid delivery points.
U
The address could not be confirmed because the address did not code at the ZIP + 4® level.
V
The address caused a false-positive violation.

CMRA

Indicates if the address is a Commercial Mail Receiving Agency (CMRA)

Y
Yes, the address is a CMRA.
N
No, the address is not a CMRA.
U
Unconfirmed.

DPVFootnote

DPV footnote codes.

AA
Input address matched to the ZIP + 4® file.
A1
Input address not matched to the ZIP + 4® file.
BB
Input address matched to DPV (all components).
CC
Input address primary number matched to DPV but secondary number not match (present but not valid).
F1
Input address is military; DPV bypassed.
G1
Input address is general delivery; DPV bypassed.
M1
Input address primary number missing.
M3
Input address primary number invalid.
N1
Input address primary number matched to DPV but high rise address missing secondary number.
P1
Input address missing RR or HC Box number.
P3
Input address missing PO, RR, or HC Box number
RR
Input address matched to CMRA.
R1
Input address matched to CMRA but secondary number not present.
R7
Input address matched to phantom carrier route R777 (not eligible for street delivery).
U1
Input address is unique ZIP; DPV bypassed.

DPVVacant

Indicates whether the building is vacant (unoccupied for 90 days). One of the following:

Y
Yes, the building is vacant.
N
No, the building is not vacant.
null
The Option.DPVDetermineVacancy option was not turned on.

DPVNoStat

Indicates whether the building is a "no stat" building and therefore unable to receive mail. One of the following:

Y
Yes, the building is a "no stat" building, which means the building is not receiving mail.
N
No, the building is not a "no stat" building, which means the building does receive mail.
null
The option was not turned on.

SuiteLink Output

Response Element

Description

SuiteLinkReturnCode

Indicates whether or not ValidateAddress corrected the secondary address information (U.S. addresses only). One of the following:

A
ValidateAddress corrected the secondary address information.
00
ValidateAddress did not correct the secondary address information.
null
SuiteLink was not performed.
XX
SuiteLink processing encountered an error. For example, an error would occur if the SuiteLink database is expired.

SuiteLinkMatchCode

Provides additional information on the SuiteLink match attempt. (U.S. addresses only)

A
ValidateAddress corrected the secondary address information.
B
ValidateAddress did not correct the secondary address information. No additional detail about the match attempt is available.
C
The words in the FirmName field are all "noise" words. Noise words are defined by the USPS® and are ignored when attempting to mach the firm name. Examples of noise words are "company" and "corporation". ValidateAddress is not able to correct secondary address information for firm names that consist entirely of noise words. For example "Company and Corporation" is all noise words.
D
The address is not a high-rise default address. SuiteLink matching is only done for high-rise default addresses. A high-rise default is a default to use when the address does not contain valid secondary information (the apartment number or apartment type is missing).
E
SuiteLink processing failed because the SuiteLink database is expired.
null
SuiteLink was not performed or there was an error.

SuiteLinkFidelity

Indicates how well ValidateAddress matched the firm name to the firm names in the SuiteLink database.

1
The firm name matches the SuiteLink database exactly.
2
Good match. All words in the firm name except one matched the firm name in the SuiteLink database.
3
Poor match. More than one word in the firm name did not match the firm name in the SuiteLink database.
null
SuiteLink could not match the firm name, or was not performed, or there was an error.

VeriMove Output

Response Element

Description

VeriMoveDataBlock

Indicates whether or not ValidateAddress should return a 250-byte field containing input data to pass to VeriMove Express. This field contains the Detail Results Indicator data required by VeriMove. For more information about the contents of this field, see the VeriMove User’s Guide. One of the following:

Y
Yes, return the field VeriMoveDataBlock.
N
No, do not return the field VeriMoveDataBlock.