Skip to main content
Related Search Topics: Network & Connectivity
Print this support article

Setting up a wireless (WiFi) connection with a SmartLink device on the mailstation2 and DM125-DM475

Learn how to set up a wireless (WiFi) connection with a SmartLink device on the mailstation2, DM125, DM300C, DM400C, and DM475.
Products affected: mailstation2™, DM125™, DM300C™, DM400C™, DM475™
To configure a wireless (WiFi) connection using a SmartLink™ device:
  1. Wireless setup requires you to go to the SmartLink Setup page.
    1. Select Wireless under 'Choose Your Connection
    2. Follow the directions to configure your wireless connection.
  2. After configuring your wireless connection:
    • If the light on your SmartLink device blinks green, then you are done connecting your SmartLink device.
    • If the light on your SmartLink device does not blink green after 3 minutes, see the Wireless Internet Troubleshooting section on the SmartLink troubleshooting page.

UPDATED: 19 July 2023