1

Unwrap the new cassette and pull the shipping tab from its back.  If necessary, turn the winder slightly counter-clockwise to take up any slack in the ribbon.

2

Hold the new cassette with the ribbon side down and the opening (print head cutout) aligned with the print head.  Rest the cassette on the deck.  Align the locating tab on the right side of the cassette with the groove in the cassette compartment.

3

Push the cassette back into the ribbon compartment as far as it will go.  Firmly press on the upper part of the cassette near the locking tab to snap it into position.  Ensure the cassette snaps into place for proper operation.

4

Close the cassette compartment door.

5

Switch the meter ON and resume normal operation.